Allwinner V883P
The V883P is the full part of Allwinner’s V883 RISC-V vision and imaging SoC series, announced on 6 November 2026 together with a V883 vision development PDK. It has four XuanTie C907 RISC-V cores, a XuanTie E907 RISC-V MCU, a 4 TOPS NPU and video up to 4K@75fps. Allwinner targets action and handheld cameras, dashcams, AI streaming cameras, multi-channel edge vision and industrial machine vision. The cut-down V883M is pin-to-pin compatible, so one board design can carry either part.
General Specifications
Specs
| SoC | Allwinner V883P |
|---|---|
| CPU | 4× XuanTie C907 (RV64GCB[V] / RV32GCB[V]) @ 1.8 GHz |
| MCU | 1× XuanTie E907 @ 600 MHz |
| Memory | DDR3 / DDR3L / LPDDR3 / DDR4 / LPDDR4 / LPDDR4X 32-bit |
| NPU | 4 TOPS (INT8) |
| VPU | Decode: 4K@60fps H.265 Decode: 4K@30fps H.264, JPEG Encode: 4K@75fps H.265 Encode: 4K@40fps H.264 Encode: 4K@60fps JPEG |
| ISP | 4K@30fps AI-ISP; multi-spectral fusion acceleration EIS: 1× 4K@60fps or 2× 4K@30fps PDAF phase-detect autofocus, 4K@60fps total 3F-WDR and LOFIC sensor support Multi-4K stitching; high-frame-rate modes up to 1080p@240fps |
| Camera | MIPI CSI-2: 2× 4-lane or 4× 2-lane, 2.5 Gbps per lane, 16-bit parallel CSI, Up to 16 cameras (edge vision solution) |
| Display | 1× 4K@30fps, or 2× 1080p@60fps (dual independent displays) MIPI DSI (1× 4-lane or 2× 2-lane) |
| USB | USB 3.1 (“USB 3.0” in the launch post) USB 2.0 (DRD) |
| Ethernet | 1× 1 GbE (RGMII) 1× 100 Mbit Ethernet (RMII) |
| CAN | CAN-FD |
| I/O | LocalBus, 10× UART, 11× TWI (I²C), 15× GPADC, 44× PWM |
| Security | Secure boot, Secure storage, Secure system |
| OS | Tina Linux |
| Package | Pin-to-pin compatible with V883M |
| Temperature | −40 °C to 85 °C (industrial) |
Source notes: Allwinner publishes its product-page spec table for “V883”, and its headline figures (4 TOPS, 4K@75fps) are the V883P’s. Allwinner’s launch post names USB 3.0, while the product page lists USB 3.1. CAN-FD appears in the launch post but not in the product page’s interface list. The launch post describes the display output as 2× 2-lane MIPI-DSI; the product page lists 1× 4-lane or 2× 2-lane. Allwinner has not published the process node, package or maximum memory size.
Linux Support
Mainline kernel
- Fully supported
- Works but not all features are implemented.
Allwinner supplies the V883 series with Tina Linux, its own Linux BSP, and a V-series SDK. No mainline support has been announced.
Documentation
- Technical Reference Manual
Resources
- Allwinner V883 product page
- Allwinner launch post: V883 series and V883 vision PDK (2026-11-06, Chinese)
- Allwinner preview post: V883 (2026-10-15, Chinese)
- IoT World: V883 launch coverage (Chinese)
- Top1Chip: V883 series announcement
- Allwinner newsroom
Boards with V883P
List of boards: