Raspberry Pi Compute Module 5
The Compute Module 5 (CM5) puts the Raspberry Pi 5 into a system-on-module for carrier boards. It keeps the CM4 footprint and its two 100-pin board-to-board connectors. Every RAM, eMMC and wireless option is listed below.
Hardware
Specs
| SoC | Broadcom BCM2712 |
|---|---|
| CPU | 4× Cortex-A76 @ 2.4 GHz Cache: L2 0.5 MB/core · L3 2 MB Cryptography extensions |
| Memory | LPDDR4X |
| GPU | VideoCore VII Vendor: OpenGL ES 3.1, Vulkan 1.2 |
| VPU | Decode: 4K@60fps HEVC |
| SoC page | Broadcom BCM2712 |
Interfaces
| Board | Raspberry Pi Compute Module 5 |
|---|---|
| Memory | LPDDR4X-4266 2 / 4 / 8 / 16 GB |
| Camera | 2× 4-lane MIPI CSI/DSI transceivers |
| Display | 2× HDMI 2.0 (4K@60), MIPI DSI |
| Storage | eMMC: none (Lite), 16, 32 or 64 GB |
| PCIe | 1× board-to-board connector: PCIe Gen 2 x1 |
| USB | 2× USB 3.0 board-to-board connector 1× USB 2.0 board-to-board connector |
| Ethernet | 1× 1 GbE (PHY with IEEE 1588 support) |
| Wi-Fi | Optional dual-band 802.11ac |
| Bluetooth | Optional 5.0 / BLE |
| GPIO | 28 GPIO via board-to-board connectors |
| Power | 5 V via carrier board |
| Form factor | System-on-module, 2× 100-pin board-to-board connectors (CM4 compatible) |
| Dimensions | 55 × 40 mm |
Compare Raspberry Pi Compute Module 5 with other boards and SoCs →