GL.iNet Brume 3 (GL-MT5000)
The GL.iNet Brume 3 (GL-MT5000) is a wired VPN security gateway on the MT7987A. It has no Wi-Fi, three 2.5 GbE ports and a USB 3.0 port, and runs GL.iNet’s OpenWrt-based firmware. GL.iNet engineers have submitted support for the mediatek/filogic OpenWrt target.
Hardware
Specs
| SoC | MediaTek MT7987A |
|---|---|
| CPU | 4× Cortex-A53 @ 2 GHz (OpenWrt MT7987A) MediaTek Filogic 860 marketing also describes a triple-core Cortex-A73 platform SKU under the same brand |
| Memory | DDR3 / DDR4 |
| Storage | SPI-NOR, SPI-NAND, eMMC |
| PCIe | PCIe Gen 3 |
| USB | USB 3.2 Gen1 |
| Ethernet | 10 GbE (USXGMII class) 2.5 GbE (PHY) 1 GbE (multiple ports on the platform) |
| Wi-Fi | Dual-band concurrent Wi-Fi 7 (a/b/g/n/ac/ax/be), Platform class BE7200 (7.2 Gbps PHY), 4x4 2.4 GHz + 5x5 5/6 GHz antenna design on the Filogic 860 RF platform |
| I/O | UART, SD, SPI, PWM, GPIO |
| Network offload | Hardware QoS and tunneling offload (VLAN / PPTP / L2TP / GRE) Networking crypto engine (EIP-197) for IPv4 NATP / IPv6 / DS-Lite / 6RD |
| SoC page | Filogic 860 / MT7987 |
Interfaces
| Board | GL.iNet Brume 3 (GL-MT5000) |
|---|---|
| Memory | DDR4 1 GB |
| Storage | 8 GB eMMC |
| USB | 1× USB 3.0 Type-A |
| Ethernet | 1× 2.5 GbE (WAN, SoC internal PHY) 2× 2.5 GbE (LAN via Realtek RTL8366UB switch) |
| Power | 5 V / 3 A via USB Type-C |
| Debugging | UART header (115200 8n1) |
| Dimensions | 92 × 75 × 25 mm |
| Weight | 148 g |
Compare GL.iNet Brume 3 (GL-MT5000) with other boards and SoCs →