BananaPi R4 Pro
The BPI-R4 Pro is the larger version of the BananaPi R4. It doubles the RAM to 8 GB and adds 10G RJ45 ports, which share the two 10G SFP+ cages, plus four 2.5 GbE ports. There are two models. The 8X has the port set below. The 4E has a 2.5G RJ45 + 10G SFP+ WAN combo, one 10G SFP+ LAN, four 2.5G and two 1G LAN ports.
Hardware
Specs
| SoC | Filogic 880 / MT7988 |
|---|---|
| CPU | 4× Cortex-A73 @ 1.8 GHz |
| Memory | DDR3 / DDR4 |
| Network offload | HW IPv4 NATP / IPv6 / DS-Lite / 6RD acceleration Hardware QoS acceleration Tunneling Offload Engine for: VLAN / PPTP / L2TP / GRE Ultra-high Speed Networking Crypto Engine for: IPSec, SSL/TLS, DTLS (CAPWAP), SRTP and MACsec |
| SoC page | Filogic 880 / MT7988 |
Interfaces
| Board | BananaPi R4 Pro (8X) |
|---|---|
| Memory | DDR4 8 GB |
| Storage | 8 GB eMMC, 256 MB SPI NAND flash |
| PCIe | 2× miniPCIe: PCIe Gen 3 x2 (for Wi-Fi 7 NICs) 1× M.2 B-Key: PCIe (4G/5G modems) |
| Ethernet | 2× 10 GbE (SFP+ (WAN + LAN), each shared with a 10G RJ45 port (Aeonsemi AS21010P)) 4× 2.5 GbE (MaxLinear MxL86252C switch) 2× 1 GbE (one on an FPC connector) |
| Wi-Fi | Wi-Fi 7 via 2× miniPCIe NIC cards |
| Power | 12 V or 24 V DC (5.5×2.1 mm) 20 V via USB Type-C or header Optional PoE module (RT5400) |
| Dimensions | 194 × 134 mm |