Renesas RZ/T2N

The RZ/T2N is a 64-bit industrial MPU for robots and multi-axis motion control, announced on 5 November 2026. Two Cortex-A55 cores run Linux and the application. Two Cortex-R52 cores handle real-time control, each with 576 KB of TCM with ECC. Renesas showed it at electronica 2026 in Munich, 10–13 November (Hall C5, Stand 479).

  • Motor control: peripherals for up to 4 axes, with 2 encoder channels per axis. Supported encoder protocols are Tamagawa T-Format, HIPERFACE DSL, A-format, EnDat 2.2, EnDat 3, BiSS C and BiSS Line.
  • Industrial Ethernet: 3 Gigabit Ethernet MACs, an Ethernet switch and an EtherCAT SubDevice Controller (ESC). It supports EtherCAT, PROFINET RT/IRT, EtherNet/IP and TSN, with HSR/PRP/FRER redundancy.
  • Safety and security: ECC on TCM, cache, on-chip SRAM and DDR, and on-the-fly DDR encryption and decryption. It also has a crypto library, secure boot, secure firmware update and Arm TrustZone.

General Specifications

Specs
SoCRenesas RZ/T2N
CPU2× Cortex-A55 (Armv8.2-A) @ 1.2 GHz
MCU2× Cortex-R52 @ 800 MHz (576 KB TCM with ECC per core)
MemoryLPDDR4-1600
16-bit
ECC
On-the-fly DDR encryption/decryption; 2 MB on-chip SRAM with ECC
PCIe1× PCIe Gen 2 x1
USB1× USB 2.0 (High-Speed host/device)
Ethernet3× 1 GbE (3-port switch, EtherCAT ESC, TSN, HSR/PRP/FRER)
I/OMotor control for up to 4 axes, 2 encoder channels per axis, 3× 12-bit ADC
SecurityArm TrustZone, Secure boot, Secure firmware update, Crypto library
Package537-pin LFBGA (21 × 21 mm, 0.8 mm pitch)
489-pin LFBGA (16 × 16 mm, 0.65 mm pitch)
TemperatureTj -40 °C to 125 °C
Industrial EthernetEtherCAT, PROFINET RT/IRT, EtherNet/IP

Linux Support

Vendor BSP

  • Renesas ships one Linux package and its Flexible Software Package (FSP) for the whole RZ/T2x and RZ/N2x range
  • An evaluation board is available from Renesas

Mainline kernel

  • Fully supported
  • Works but not all features are implemented.
  • Unknown, not checked yet

Documentation


Boards with Renesas RZ/T2N