Libre Computer Renegade (ROC-RK3328-CC)
Renegade is Libre Computer’s RK3328 board, crowdfunded on Indiegogo. In the Raspberry Pi 3 B+ footprint it adds USB 3.0, Gigabit Ethernet and up to 4 GB of DDR4, but drops one USB Type-A port. Mainline Linux and U-Boot support it until 2047.
Hardware
Specs
| SoC | Rockchip RK3328 |
|---|---|
| Process | 28 nm |
| CPU | 4× Cortex-A53 @ 1.4 GHz Cryptography extensions |
| Memory | DDR3 / DDR4 / LPDDR3 32-bit Up to 4 GB |
| GPU | Mali-450 MP2 @ 500 MHz Vendor: OpenGL ES 2.0, OpenVG 1.1 Mesa: OpenGL 2.1, OpenGL ES 2.0 (Lima, Lima kernel); Lima: no OpenGL ES 3.x, OpenCL or Vulkan planned; Mali-470 unsupported |
| VPU | Decode: 4K@60fps H.265, H.264, VP9 Encode: 1080p@30fps H.265, H.264 |
| Display | 4K HDR HDMI 2.0, CVBS |
| USB | 1× USB 3.0 3× USB 2.0 |
| Ethernet | 1× 1 GbE 1× 100 Mbit Ethernet (integrated PHY) |
| SoC page | Rockchip RK3328 |
Interfaces
| Board | Libre Computer Renegade (ROC-RK3328-CC) |
|---|---|
| Memory | DDR4 32-bit 1 / 2 / 4 GB |
| Display | 1× HDMI 2.0 (4K HDR), 3.5 mm TRRS CVBS/AV jack |
| Storage | microSD (UHS SDR104), eMMC 5.x module connector |
| USB | 1× USB 3.0 Type-A 1× USB 2.0 Type-A 1× USB 2.0 Type-A (dual-role) |
| Ethernet | 1× 1 GbE |
| GPIO | 40-pin header (I2S, PWM, I2C, 2× UART, SPI, SPDIF), 3-pin ADC header, 3-pin PMIC power control header |
| Power | 5 V via micro USB; 4 W typical, 5 W full load |
| Form factor | Libre Computer CC form factor (Raspberry Pi 3 Model B+ footprint and mounting holes) |
| Dimensions | 85 × 56 × 20 mm |
| Other | IR receiver with wake support, USB ROM boot button |
| Software support | Until 2047 |
Compare Libre Computer Renegade (ROC-RK3328-CC) with other boards and SoCs →