TI SK-AM68
The SK-AM68 is TI’s starter kit for the AM68 and AM68A vision processors. TI calls it a prototype evaluation module available in limited quantities. It takes up to eight cameras through a multi-camera hub.
Hardware
Specs
| SoC | TI AM68 / AM68A |
|---|---|
| CPU | 2× Cortex-A72 @ 2 GHz Cache: L2 1 MB |
| MCU | 4× Cortex-R5F @ 1000 MHz |
| Memory | LPDDR4-4266 Inline ECC |
| GPU | BXS-4-64 @ 800 MHz Mesa: Vulkan 1.2 (PowerVR, powervr kernel) |
| NPU | C7x DSP + MMA, 8 TOPS Deep-learning only on AM68A |
| VPU | H.264 / H.265 encode and decode |
| ISP | 480 MPixel/s |
| Display | eDP, 2× MIPI DSI, MIPI DPI |
| PCIe | 1× PCIe Gen 3 |
| USB | 1× USB 3.0 (dual-role, Type-C switching) |
| CAN | 20× CAN-FD |
| Temperature | -40 °C to 105 °C |
| SoC page | TI AM68 / AM68A |
Interfaces
| Board | TI SK-AM68 |
|---|---|
| Memory | LPDDR4-4266 16 GB Inline ECC |
| Camera | 2× Raspberry Pi-compatible CSI-2 connectors, 40-pin Samtec camera connector (up to 8 cameras via hub) |
| Display | 1× DisplayPort (4K, MST), 1× HDMI (1080p) |
| PCIe | 1× M.2 M-Key: PCIe |
| USB | 3× USB 3.0 Type-A 1× USB 3.0 Type-C |
| Ethernet | 1× 1 GbE |
| CAN | 4× CAN-FD |
| Power | External supply (JACINTO-EVM-POWER-SUPPLIES) |
| Debugging | 4 UART terminals over one USB bridge |