TI SK-AM69
The SK-AM69 is TI’s starter kit for the AM69 and AM69A. It has 32 GB of LPDDR4 and takes up to twelve cameras through a multi-camera hub. CNX Software reported a price of $299 at launch.
Hardware
Specs
| SoC | TI AM69 / AM69A |
|---|---|
| CPU | 8× Cortex-A72 @ 2 GHz Cache: L2 2 MB |
| MCU | 4× Cortex-R5F @ 1000 MHz |
| Memory | LPDDR4-4266 Inline ECC |
| GPU | BXS-4-64 @ 800 MHz Mesa: Vulkan 1.2 (PowerVR, powervr kernel) |
| NPU | 4× C7x DSP + MMAv2, 32 TOPS 8 TOPS per core, deep-learning only on AM69A |
| VPU | H.264 / H.265 encode and decode |
| ISP | 1440 MPixel/s |
| Ethernet | 2× 10 GbE (USXGMII / XFI) 6× 2.5 GbE (SGMII, integrated switch with up to 8 ports total) |
| SoC page | TI AM69 / AM69A |
Interfaces
| Board | TI SK-AM69 |
|---|---|
| Memory | LPDDR4-4266 32 GB Inline ECC |
| Camera | Raspberry Pi-compatible CSI-2 connectors and a 40-pin Samtec camera connector (up to 12 cameras via hub) |
| Display | 1× DisplayPort (4K, MST), 1× HDMI (1080p) |
| PCIe | 1× M.2 M-Key: PCIe 1× M.2 E-Key: PCIe |
| USB | 3× USB 3.0 Type-A 1× USB 3.0 Type-C |
| Ethernet | 1× 1 GbE |
| CAN | 4× CAN-FD |
| Debugging | 4 UART terminals over one USB bridge |